Quick Answer:
For the 1800 vs 2510 box making machine choice, start with the largest repeatable blank in your order mix, not the model number. The HW-1800 page publishes a 1,800 mm maximum stripping width and a 2–10 mm board range. The HW-2510 page publishes W2,550 mm and 2–12 mm. Those figures describe width and board limits, not a finished-box size. HUAWEI builds both widths and can review your blank drawings and order mix.
This guide turns finished box sizes into blanks, identifies the crossing edge, and separates width fit from process fit. Both models are listed in HUAWEI’s digital box-making machine range; your order mix decides where to start.
What Does Working Width Mean on a Corrugated Box Making Machine?
A corrugated box starts as a flat blank: a cut and scored sheet that folds into shape. For this comparison, the blank’s length runs in the machine’s feed direction; its width crosses the machine. Working width is the usable dimension across the machine, or the maximum blank width it accepts in a rated configuration. It is not the maximum finished-box width, because the blank combines box dimensions differently by style.
Scores are pressed lines that become folds. Slots are cut gaps between flaps. The glue joint is the overlap tab that joins the blank into a tube. Box style sets the arrangement: an RSC uses two equal flap pairs, a full-overlap slotted container uses longer outer flaps, a half-slotted container has flaps on one side, and die-cut or custom styles follow a shaped cutting drawing.
A finished-box dimension alone cannot tell you whether the blank fits. You need the blank.
How Do You Calculate the Blank Width Your Orders Need?
For a regular slotted container (FEFCO 0201, or RSC), estimate the blank from three box dimensions and the glue joint:
- Blank length = 2 × (L + W) + glue joint
- Blank width = H + W
L is box length, W is box width, and H is height. Use the same unit throughout.
Example 1: a 400 × 300 × 200 mm box with a 40 mm glue joint.
- Blank length = 2 × (400 + 300) + 40 = 1,440 mm
- Blank width = 200 + 300 = 500 mm
- Blank: 1,440 × 500 mm
Example 2: a 700 × 500 × 400 mm box with a 40 mm glue joint.
- Blank length = 2 × (700 + 500) + 40 = 2,440 mm
- Blank width = 400 + 500 = 900 mm
- Blank: 2,440 × 900 mm
These are first estimates for an RSC. Full-overlap, half-slotted, die-cut, and custom styles change the outline, so use the actual cutting drawing or a sample blank.

1800 mm vs 2510 mm: Which Orders Does Each Cover?
Both models list single- and double-wall board, the same minimum stripping area, air requirement, and handhole size. They differ in published stripping width, board thickness, and connected power. The specifications below reflect both product pages as checked on 12 November 2026.
| Published specification | HW-1800 | HW-2510 |
|---|---|---|
| Maximum stripping area | W1800 mm × unlimited length | W2550 mm × unlimited length |
| Minimum stripping area | 200 × 650 mm | 200 × 650 mm |
| Corrugated board | Single and double wall | Single and double wall |
| Board thickness | 2–10 mm | 2–12 mm |
| Power | 380 V / 11 kW | 380 V / 17 kW |
| Air | 0.6–0.7 MPa, 30 L/min | 0.6–0.7 MPa, 30 L/min |
| Handhole | 160 × 80 mm | 160 × 80 mm |
Treat the width row as a published envelope, not a finished-box size. The HW-1800 product page lists the narrower figure; the HW-2510 page lists the wider one. The HW-2510 name does not mean 2,510 mm; its current page publishes W2,550 mm. Ask the machine builder for the exact rated width and allowance in the quotation.
Board thickness can rule out the HW-1800 before you compare width. Its page stops at 10 mm; the HW-2510 extends to 12 mm. If your board list includes 11 or 12 mm, only the HW-2510’s published thickness range covers it. Confirm grade and caliper in the quotation. If all work stays at 10 mm or below, thickness does not decide.

The 1,440 × 500 mm blank can cross either width if 500 mm is the across-machine edge. The 2,440 × 900 mm blank needs a layout check: in the RSC calculation, 2,440 mm is length and 900 mm is width. If your layout feeds the 2,440 mm length and the 900 mm width crosses the machine, it may fit the 1,800 mm envelope. That is not approval to rotate the blank or an approved layout. Confirm feed direction, transport, tooling, and layout with the machine builder.
Why Does a Wider Machine Not Always Mean Less Waste?
A wider machine is not a wider trimmer. Working width describes capacity across the machine; it does not mean the machine consumes board across that full width. Board use depends on the sheet and cutting layout.
Extra width matters when a blank exceeds the narrower machine’s usable width, or when a verified layout uses it to cut board consumption. The second case needs a check of feed, tooling, skeleton, separation, and stacking. Otherwise, do not assume wider means less waste; board use follows the layout, not the model name.
How Should You Test Your Largest and Smallest Jobs?
Build a two-end test with the largest repeatable blank in your order mix, then the smallest. For each, record blank length and width, board grade and thickness, box style, and the across-machine edge. Compare that edge with the published or quoted working width.
Then ask whether the quoted machine supports that board thickness, tooling, style, and operations. A blank can clear the width and still fail on board, tooling, or feed. Width fit and process fit are separate answers.

The smallest jobs need the same check. Both pages list a 200 × 650 mm minimum stripping area, but your small blank and tooling still need confirmation.
What Else Changes When You Choose the Wider Model?
Power is the other published difference: 380 V / 11 kW on the HW-1800 and 380 V / 17 kW on the HW-2510. Treat it as a site-planning input, not an efficiency claim. Confirm the electrical service, air supply at 0.6–0.7 MPa and 30 L/min, and floor space for the machine, infeed, and outfeed.
Transport and rigging also need checking against the shipping configuration. Tooling and style-specific requirements belong in the same review; a width fit says nothing about whether the quoted tooling handles your box style. Use the service page for installation, training, and spare-parts questions without assuming response times or coverage.
.hw-product-card { display: flex; flex-wrap: wrap; max-width: 950px; margin: 40px auto; background-color: #ffffff; border: 1px solid #eaeaea; border-radius: 8px; overflow: hidden; box-shadow: 0 4px 15px rgba(0, 0, 0, 0.05); font-family: ‘Helvetica Neue’, Helvetica, Arial, sans-serif; transition: box-shadow 0.3s ease; } .hw-product-card:hover { box-shadow: 0 8px 25px rgba(0, 0, 0, 0.08); } /* 左侧图片区域 */ .hw-card-img-wrap { flex: 0 0 45%; background-color: #f8f9fa; display: flex; align-items: center; justify-content: center; padding: 30px; box-sizing: border-box; } .hw-card-img-wrap img { max-width: 100%; height: auto; object-fit: contain; display: block; } /* 右侧内容区域 */ .hw-card-content { flex: 1; padding: 45px 40px; display: flex; flex-direction: column; justify-content: center; box-sizing: border-box; } .hw-card-title { font-size: 24px; font-weight: 700; color: #222222; line-height: 1.3; margin-top: 0; margin-bottom: 16px; } .hw-card-desc { font-size: 15px; color: #555555; line-height: 1.7; margin-bottom: 28px; } /* 红色 CTA 按钮 */ .hw-card-btn { display: inline-block; width: fit-content; padding: 12px 32px; background-color: #E60012; /* 华为经典红 */ color: #ffffff !important; text-decoration: none !important; font-size: 15px; font-weight: 600; border-radius: 4px; transition: background-color 0.3s ease, transform 0.2s ease; } .hw-card-btn:hover { background-color: #c4000f; transform: translateY(-2px); } /* 移动端适配 */ @media (max-width: 768px) { .hw-product-card { flex-direction: column; } .hw-card-img-wrap { padding: 20px; width: 100%; flex: none; } .hw-card-content { padding: 25px 20px; text-align: center; } .hw-card-title { font-size: 20px; } .hw-card-btn { margin: 0 auto; } }
HW-1800 Full Intelligent Digital Box-making Machine
Which Width Should You Put in Your RFQ?
Put the width question in writing. State blank length and width for your largest and smallest jobs, the across-machine edge, feed direction, board grade and thickness, box style, glue joint, and required operations. Ask the machine builder to confirm the exact rated width and any allowance for your blanks, not just the model’s headline number.
Then ask separately whether the quoted configuration supports those board thicknesses, tooling, style, and operations. Width confirmation answers only the dimensional question. If a blank sits close to the limit, send a dimensioned drawing and a sample blank.
Buyer Checklist and RFQ Questions
- Largest and smallest blanks, with the across-machine edge marked
- Feed direction and assumed layout
- Board grade, wall combination, and thickness
- Box style, cutting drawing, glue joint, and operations
- Exact rated width and allowance in the quotation
- Separate confirmation of board, tooling, style, and process fit
- Utility, air, floor space, transport, and installation scope
Frequently Asked Questions
Is the HW-2510 working width 2,510 mm?
The model name does not establish that. The current page publishes W2,550 mm as its maximum stripping area. Ask for the exact rated working width and any allowance in the quotation.
Can I compare finished-box width directly with working width?
No. Convert the box into a blank first, then compare the edge that crosses the machine.
Does a wider machine always reduce board waste?
No. Extra width matters only when it covers a larger blank or a verified layout reduces board use.
Can a 2,440 × 900 mm blank run on an 1800 mm machine?
It may, under the conditional layout above: 900 mm across the machine and 2,440 mm in the feed direction. Confirm feed direction, transport, tooling, and layout with the machine builder. Rotation is not approved by this example.
Conclusion
Start with the HW-1800 when your repeatable blanks fit its published 1,800 mm stripping width and your board stays within 2–10 mm. Start with the HW-2510 when your board list includes 11 or 12 mm or you need the wider published envelope. Confirm rated width, allowance, tooling, and process fit in the quotation.
Send dimensioned blank drawings, sample blanks, board grades, box styles, and your order mix through the contact page and ask HUAWEI to review the fit.





